Skip to main content

Virtual Lab module · PLC & Automation

PLC Practice: Six Ready-Made Automation Labs in the Browser

Each lab opens already wired and programmed, so you can tune it, disturb it, and watch the process respond. The ladder diagram and Structured Text editor is connected to the circuit in the workspace.

Complements, and does not replace, practice with physical equipment.

Koniami Virtual Lab
Koniami Virtual Lab workspace (illustrative screenshot)
Illustrative workspace screenshot — this module’s own screenshot is coming.

What you practice

  • VFD Manual Speed: frequency to speed and flow
  • Heavy Start & Protection: MCCB curve and overload trip class
  • Level ON/OFF Control: PLC and contactor
  • Motor Speed Control: PLC PI with VFD feedback
  • Motion Control: PLC pulses, stepper, homing
  • PID Level Control: PLC PI, VFD, and pump

Wiring mistakes it can recognize

  • Broken sensor wire

    Can be simulated in the level-control labs to see how the program reacts.

  • Mismatched stepper microstep setting or swapped coil

    The axis moves wrongly, which you can observe in the motion-control lab.

  • Wrong trip class or MCCB curve

    The wrong choice causes nuisance trips when the motor starts.

Try it yourself in the browser, no installation

Book a Demo