Skip to main content

Virtual Lab module · Forward–Reverse

Forward–Reverse with Two Contactors and an Interlock

A 3-phase motor is reversed by swapping two phases through a second contactor. Because the two contactors must never be on together, this circuit trains the electrical interlock.

Complements, and does not replace, practice with physical equipment.

Koniami Virtual Lab
Koniami Virtual Lab workspace (illustrative screenshot)
Illustrative workspace screenshot — this module’s own screenshot is coming.

What you practice

  • Wire the forward and reverse contactors, three push buttons (forward, reverse, stop), and an overload relay
  • Understand how the reverse contactor swaps two phases
  • Place the other contactor’s NC contact in the coil path as the interlock
  • Check in the Logic tab whether both can energize together

Wiring mistakes it can recognize

  • Interlock contact missing or in the wrong place

    If it is only in the seal-in branch, both contactors can still be on and the Logic tab reports a short circuit.

  • Both contactors can energize together

    The phases are shorted to each other; the behavior finding shows the path.

  • Incomplete control wiring

    The Guide shows which connections are still missing.

Try it yourself in the browser, no installation

Book a Demo